Stegmeier Pool & Spa Parts
Browse 56 Stegmeier products available at BidBuild Marketplace. Check each item's MFG # to match your existing equipment, and contact our team if you need help finding the right part.
Flowmaster Comm. Tee White | FMTW
The Flowmaster Commercial tee is used to lay out a Flowmaster drain run. Flowmaster Commercial is a 4-inch removable-top deck drain with a double-wall base and snap-in top, built for commercial pools, patios and other areas that need to move large amounts of water. Tops are staggered past the joints for rigid connections and can be removed for cleaning or replacement.Key Features Tee for the Flowmaster Commercial deck drain Connect with Flowmaster couplers Grate/top cap not included White
Superdrain Coupler 12/Cs | SRDCUP
Coupler for joining Stegmeier Super Drain sections and fittings. Super Drain is a non-directional round drain system with a full range of non-directional fittings.Key Features Required to connect Super Drain and fittings 12 per case
Stegmeier Flowmaster 3 Deck Drain 10' Gray, Concrete, 99.7 gpm
A 3-inch commercial deck drain assembly with a removable snap-in PVC top and a double-wall base. Designed for drainage on commercial swimming pools, patios, and other areas requiring rapid surface water removal. The staggered, removable tops allow access for cleaning and replacement while providing a rigid joint when installed.Key Benefits 3-inch wide deck drain opening Removable snap-in PVC tops for easy cleaning Double-wall base for structural rigidity Staggered top installation to reinforce joints Suitable for commercial pools and patios
Stegmeier Frontier Deck Drain Pro Tee, Tan
The Stegmeier Frontier Tee is used to build out a Frontier Deck Drain run on pool decks, patios, spas and similar areas. Tops are staggered past the joints for rigid connections, and because they are removable the drain is easy to clean and caps can be replaced if damaged.Key Features Tee for the Stegmeier Frontier Deck Drain system Connect to drain and fittings with Frontier Deck Drain couplers (DCUP) Non-directional fitting for flexible layouts
Stegmeier Capstone Plumb Strip Fiberglass Square Edge Flex Form 8' x 112', Tie Wire, No Tile Strip, Gray, 14-Pack
Plumb strip accessory designed for setting forms on one-piece fiberglass pool shells. It squares the top edge of the fiberglass shell to simplify aligning and securing formwork. Intended for use during pool form installation to help achieve plumb, consistent form placement.Key Benefits Designed for one-piece fiberglass pools Squares top edge of fiberglass shell Aids accurate alignment of forms Simplifies setting forms plumb
BackorderStegmeier Regular Plumb Strip Fiberglass Square 8' x 112' Flex Tie Wire Cantilever Form, Gray, 14-Pack
Plumb strip for aligning and squaring the top edge of one-piece fiberglass pool shells. Designed to be used when setting concrete formwork, it helps position forms plumb and maintain a consistent edge during installation. Suitable for use with Stegmeier fiberglass pools and similar one-piece shell installations.Key Benefits Designed for one-piece fiberglass pool shells Squares the top edge for consistent form placement Helps set forms plumb for accurate alignment Easy to use during form installation
Stegmeier Frontier Deck Drain Side | SDD-SA
The Stegmeier Frontier Side Adapter is used to build out a Frontier Deck Drain run on pool decks, patios, spas and similar areas. Tops are staggered past the joints for rigid connections, and because they are removable the drain is easy to clean and caps can be replaced if damaged.Key Features Side Adapter for the Stegmeier Frontier Deck Drain system Connect to drain and fittings with Frontier Deck Drain couplers (DCUP) Non-directional fitting for flexible layouts Adapts to 1-1/2" Schedule 40 PVC pipe
Stegmeier Deck Drain Universal Coupler, Concrete
Universal coupler used to join Stegmeier deck drain sections and fittings. Stegmeier Deck Drain is an extruded PVC drain supplied in 10-foot sections, set level on grade with stakes to collect surface water on pool decks, patios and walkways.Key Features Connects drain sections and fittings Used with Channel Drain, Frontier Deck Drain, Deck Drain and Treadmaster Commercial PVC construction
Stegmeier Deck Drain 10' White Concrete 10.7 gpm
An extruded PVC deck drain designed to collect and channel surface water in pedestrian areas. Supplied in 10-foot lengths with connecting couplers, it is intended to be installed level in pool decks, patios, walkways, and similar surfaces. The drain is installed on grade using stakes, eliminating the need for trenching and simplifying placement.Key Benefits Extruded PVC construction for corrosion resistance Supplied in 10 ft lengths with connecting couplers Designed for level installation in pedestrian areas Staked on grade, no trenching required for installation Suitable for pool decks, patios, and walkways
Stegmeier Capstone Form Tile Strip Gunite/Fiberglass 8' 112' Tie Wire, 14-Pack, White
Stegmeier cantilever forms are made from foam and attach to the tile on gunite pools with double-faced tape and tie wires. Set-up is quick, usually the morning of the pour, and the forms can be removed while the concrete is still wet enough to slick-finish the edge with a foam profile edging tool. Tie wires are spaced about 6 inches apart and are designed to break below the concrete surface.Key Features Capstone profile For gunite and fiberglass pools 8 ft pieces, 14 per pack (112 ft), white tile strip, tie wire
Stegmeier Gunite 80' Pool Cover Form, 10-Pack
Pool Cover Form E is a molded pool edging form designed for use with encapsulated automatic pool covers on gunite and vinyl liner pools. It creates a cantilevered edge that positions the cover track and foam protrusion to fit inside the encapsulation face. When installed correctly, the form helps prevent concrete contamination of the automatic pool cover track.Key Benefits Designed for encapsulated automatic pool covers Compatible with gunite and vinyl liner pools Cantilever edge positions cover track Foam protrusion fits inside encapsulation face Helps prevent concrete contamination of track
Stegmeier Flowmaster 3 Drain Base Only | FM3-BASE
The Stegmeier Flowmaster 3 base is the double-wall drain channel, sold without a top cap. Flowmaster 3 is a 3-inch removable-top deck drain with a double-wall base and snap-in PVC top, designed for commercial swimming pools, patios and other areas that need rapid surface drainage. Tops are staggered past the joints for rigid connections and can be removed for cleaning or replacement.Key Features For the Stegmeier Flowmaster 3 deck drain system PVC construction 10 ft length
Stegmeier Flowmaster 3 Top Cap-Grey
The Stegmeier Flowmaster 3 top cap is the snap-in replacement top. Flowmaster 3 is a 3-inch removable-top deck drain with a double-wall base and snap-in PVC top, designed for commercial swimming pools, patios and other areas that need rapid surface drainage. Tops are staggered past the joints for rigid connections and can be removed for cleaning or replacement.Key Features For the Stegmeier Flowmaster 3 deck drain system PVC construction Gray, 10 ft length
Stegmeier Super Drain Deck Drain 10' Gray Concrete 8.8 gpm
Round Super Drain is a corrugated drainage pipe designed to move groundwater away from foundations and subsurface areas. It is intended for residential and light commercial drainage applications where high flow capacity and ease of installation are needed. The product includes a nailing guide that doubles as a water seal and is compatible with a range of non-directional fittings.Key Benefits Corrugated round drain for subsurface water management Nailing guide doubles as a water seal against moisture transfer High flow capacity for efficient groundwater removal Compatible with non-directional fittings for flexible layouts
Stegmeier Frontier Deck Joint, Gray
Frontier Deck Joint is an extruded PVC deck joint supplied in 12-foot lengths. It is installed into freshly poured concrete to form a weakened plane that controls cracking and accommodates movement. The profile includes T-shaped members that act as a water stop, and it can be used with Frontier Rigid Hold when full expansion or patterned joints are required.Key Benefits Extruded PVC profile for concrete joints Supplied in 12-foot lengths for continuous runs T-shaped members provide a water stop Creates a weakened plane to control cracking Compatible with Frontier Rigid Hold for expansion or patterns
Stegmeier Flowmaster 3 Commercial 45 | FM345
The Stegmeier Flowmaster 3 45 degree angle turns a drain run 45 degrees. Flowmaster 3 is a 3-inch removable-top deck drain with a double-wall base and snap-in PVC top, designed for commercial swimming pools, patios and other areas that need rapid surface drainage. Tops are staggered past the joints for rigid connections and can be removed for cleaning or replacement.Key Features For the Stegmeier Flowmaster 3 deck drain system PVC construction
Stegmeier Clip-Loc Corner Vinyl Liner Capstone Inside Corner 6", 4-Pack
Preformed 6-inch inside capstone corners designed for concrete formwork. These clip-loc corners fit the Capstone series and reduce on-site bending and cutting by providing ready-made inside corners. Packaged in cartons of four, they are intended for use with compatible Capstone form panels to speed installation.Key Benefits Preformed 6-inch inside corner Clip-loc design for secure attachment Fits Capstone form panels Packaged 4 corners per carton
Stegmeier Deck Drain Universal End Plug, Concrete
This end plug fitting is part of the Stegmeier Deck Drain system. Stegmeier Deck Drain is an extruded PVC drain supplied in 10-foot sections, set level on grade with stakes to collect surface water on pool decks, patios and walkways.Key Features End Plug for Stegmeier Deck Drain Joins to drain sections with Stegmeier deck drain couplers PVC construction for corrosion resistance Caps the end of a drain run
BackorderStegmeier Frontier Deck Drain Gray 8/Cs, 10'
Frontier Deck Drain is a removable-top deck drain with a double-wall base and a snap-in top cap, used on pool decks, patios, spas and other light-duty concrete areas. Tops are staggered past the joints for rigid connections, and because they are removable the drain is easy to clean and caps can be replaced if damaged.Key Features Gray, 10 ft sections 8 per case Drill and pin the base at 3 ft intervals to stabilize against slab movement
Stegmeier Gunite Regular 8' 112' Tie Wire Form, 14 Pack
Stegmeier cantilever forms are made from foam and attach to the tile on gunite pools with double-faced tape and tie wires. Set-up is quick, usually the morning of the pour, and the forms can be removed while the concrete is still wet enough to slick-finish the edge with a foam profile edging tool. Tie wires are spaced about 6 inches apart and are designed to break below the concrete surface.Key Features Regular profile For gunite pools 8 ft pieces, 14 per pack (112 ft), tie wire
Stegmeier Deck Drain Universal End Adapter, Concrete, 1-1/2" Outlet
This end adapter fitting is part of the Stegmeier Deck Drain system. Stegmeier Deck Drain is an extruded PVC drain supplied in 10-foot sections, set level on grade with stakes to collect surface water on pool decks, patios and walkways.Key Features End Adapter for Stegmeier Deck Drain Joins to drain sections with Stegmeier deck drain couplers PVC construction for corrosion resistance 1-1/2" outlet
Stegmeier Tie Wire Side Kit, 5-Pack
Tie wire side kit for use with Stegmeier cantilever forming systems, providing mechanical connections to reinforce form mounting. Each kit contains the attachment hardware needed for proper installation of the forming system. Tie wires are designed to break inside the concrete to allow removal after the pour.Key Benefits Includes attachment hardware for cantilever forms Reinforces form mounting during concrete pours Tie wires engineered to break inside concrete for removal Compatible with Stegmeier cantilever forming systems
Stegmeier Flowmaster 3 Deck Drain Fitting Down Adapter 1-1/2"
The Stegmeier Flowmaster 3 Down Adapter (MFG # FM3DA) connects a Flowmaster 3 deck drain to 1-1/2" drain pipe, turning the drain channel downward so water can be piped away below the deck.Flowmaster 3 is a 3" removable-top deck drain with a double-wall PVC base and snap-in top, used on commercial swimming pools, patios and other areas where large amounts of water need to be removed. Because the tops are removable, the drain is easy to clean and tops can be replaced if needed. Fits Stegmeier Flowmaster 3 deck drain 1-1/2" down outlet Durable PVC construction Sold 1 per carton
Stegmeier Frontier Deck Drain Pro 45 Degree Angle
The Stegmeier Frontier 45 Degree Angle is used to build out a Frontier Deck Drain run on pool decks, patios, spas and similar areas. Tops are staggered past the joints for rigid connections, and because they are removable the drain is easy to clean and caps can be replaced if damaged.Key Features 45 Degree Angle for the Stegmeier Frontier Deck Drain system Connect to drain and fittings with Frontier Deck Drain couplers (DCUP) Non-directional fitting for flexible layouts Sold 10 per carton