Stegmeier Pool & Spa Parts
Browse 56 Stegmeier products available at BidBuild Marketplace. Check each item's MFG # to match your existing equipment, and contact our team if you need help finding the right part.
Stegmeier Capstone Plumb Strip Fiberglass Square Edge Flex Form 8' x 112', Tie Wire, No Tile Strip, White, 14-Pack
Plumb strip designed for setting forms on one-piece fiberglass pool shells. It attaches at the top edge of the shell to square and align the shell so forms can be positioned plumb. Intended for use during form installation on fiberglass pools to simplify alignment and reduce adjustments.Key Benefits Designed for one-piece fiberglass pool shells Squares top edge for accurate form placement Simplifies setting forms plumb during installation
Stegmeier Renovation Form Regular Cantilever Form 8' Tie Wire, 14-Pack
Renovation Form Regular is a molded form used to replace existing coping stones or to form cast-in-place concrete countertops. It attaches to ceramic tile or substrate with double-faced tape and is secured with included tie wires for additional support. The form is intended for remodel and countertop casting applications where existing coping is being updated or concrete edges are being formed on site.Key Benefits Designed for remodeling to replace existing coping Attaches to ceramic tile with double-faced tape Includes tie wires for extra support during casting Suitable for forming cast-on-site concrete countertops Molded form compatible with retrofit applications
Stegmeier Deck Drain 10' Gray Concrete 10.7 gpm
Extruded PVC deck drain designed to collect and channel surface water on horizontal pedestrian surfaces. Includes connecting couplers and is intended to be installed level, making it suitable for pool decks, patios, walkways, and other pedestrian traffic areas. The unit is installed on grade using stakes, avoiding the need for trenching.Key Benefits Extruded PVC construction for corrosion resistance Includes connecting couplers for continuous runs Designed to be set level for uniform drainage Stake-on-grade installation, no trenching required Suitable for pool decks, patios, and pedestrian areas
Stegmeier Re-Cover Strip - White (12' Pc) (20/Box) Re-Cover Strip - White 12Ft Section Sold As Each | RS2W
Re-Cover Strip is an aftermarket repair for damaged deck joints. After a saw cut through the top of the old joint, the strip clips over it and is held in place with adhesive. It can be used on joints that have been edged or not edged.Key Features White 12 ft sections Sold each (20 per box)
Stegmeier Flowmaster 3 Commercial Deck Drain Top Cap, Tan, 10'
The Stegmeier Flowmaster 3 top cap is the snap-in replacement top. Flowmaster 3 is a 3-inch removable-top deck drain with a double-wall base and snap-in PVC top, designed for commercial swimming pools, patios and other areas that need rapid surface drainage. Tops are staggered past the joints for rigid connections and can be removed for cleaning or replacement.Key Features For the Stegmeier Flowmaster 3 deck drain system PVC construction Tan, 10 ft length
Stegmeier Clip-Loc Regular Form Vinyl Liner 8', 112', w/o Tile Strip, 14-Pack
Clip-Loc Regular is a pool coping form designed for use with in-ground liner pools. It mounts to the liner track, using the existing liner receiver as the attachment point. When properly installed, the form keeps concrete away from the liner receiver to protect the pool liner during installation.Key Benefits Designed for in-ground liner pools Mounts to liner track for secure attachment Prevents concrete contamination of liner receiver Compatible with Clip-Loc installation method
Stegmeier Frontier Deck Drain Pro Down Adapter
The Stegmeier Frontier Down Adapter is used to build out a Frontier Deck Drain run on pool decks, patios, spas and similar areas. Tops are staggered past the joints for rigid connections, and because they are removable the drain is easy to clean and caps can be replaced if damaged.Key Features Down Adapter for the Stegmeier Frontier Deck Drain system Connect to drain and fittings with Frontier Deck Drain couplers (DCUP) Non-directional fitting for flexible layouts Adapts to 1-1/2" Schedule 40 PVC pipe
Flowmaster 3 - Top Cap Only Wh Ite | FM3-TCW
The Stegmeier Flowmaster 3 top cap is the snap-in replacement top. Flowmaster 3 is a 3-inch removable-top deck drain with a double-wall base and snap-in PVC top, designed for commercial swimming pools, patios and other areas that need rapid surface drainage. Tops are staggered past the joints for rigid connections and can be removed for cleaning or replacement.Key Features For the Stegmeier Flowmaster 3 deck drain system PVC construction White, 10 ft length