Zodiac Pool & Spa Parts

Zodiac SEAL, END CAP NLA

Zodiac 1 Meter Twist Lock Hose Replacement Kit, 12/Pack | R0527800

The Zodiac Twist Lock Hoses R0527800 is a 12 pack of replacement hoses for the Zodiac Baracuda MX6/MX8 and T5 Duo Automatic Suction Side Pool Cleaners. Each induvidual section of replacement hose is 3' in length. This is a set of 12 Replacement Twist Lock Hoses for a total of 36' of hose. For a single Replacement Twist Lock Hose section, use item number (R0527700).

Zodiac Baracuda Diaphragm Replacement | X73010

Zodiac Cyclonic Leaf Catcher | CLC500

Conveniently captures leaves and other debris before they reach the skimmer, pump, or filter. Advanced cyclonic technology creates a dynamic water flow to keep debris and impurities from clogging the canister and restricting suction. Compatible with most suction pool cleaners, works with turbine-driven or disc-style models. Adapters included for universal hose connections.

Zodiac Mx8 Cover Latch Replacement Kit | R0526300

The cover latch is a replacement part for the Baracuda MX8 Pool Cleaner and allows you to open the lid of the cleaner by simply pressing a tab down and lifting.

Zodiac 45 Degree Weir Elbow (Eva) Baracuda 45 Degree Elbow 0 | W70244

Zodiac Mx8 Track Replacement Kit | R0526100

Zodiac Baracuda Replacement Track R0526100 for the Zodiac MX8, MX8 Elite and MX6 Pool Cleaners. The tracks are designed to keep the cleaner a specific distance off of the bottom and provide grip for the cleaner to climb slopes and walls. The tracks may wear down over time from normal use. To replace, simply pull the tracks off of the panel and push the new track back on. Tracks are sold individually, so make sure you get the correct number of tracks (Zodiac pool cleaners use 2 tracks).

Zodiac Lower Body Housing Replacement Kit | R0525700

Zodiac Baracuda G3 Foot Flange | W70328

Zodiac G3 Complete Unit I/G Suction-Side Cleaner w/ 36' Feed Hose | W03000

Zodiac Baracuda MX8 Cleaner Side B Direction Control Device | R0524800

This direction control device (side B) is a replacement part for the Baracuda MX8 pool cleaner. This gear set drives the pool cleaner, moving it left, right, forward, and backward.

Zodiac Mx8 Direction Control Device | R0524700

This Direction Control Device (Side A) is a replacement part for the Baracuda MX8 Pool Cleaner. This is the gear set that drives the pool cleaner moving it left, right, forward, and backwards.

Zodiac Baracuda MX8 Cleaner Scrubber Assembly | R0525000

The scrubber assembly is a replacement part for the Baracuda MX8. There are two scrubbers needed for the MX8 pool cleaner. This piece sits on the bottom of the pool cleaner right under the body panel and moves in opposite directions to scrub the bottom of the pool. This results in stubborn dirt and debris being kicked up in the water so the pool cleaner can easily capture it.

Zodiac Sweep Hose Scrubber (3 Pack) | R0522400

Zodiac Long Life Diaphragm | W69698

Zodiac Baracuda G3 Suction Side Pool Cleaner Long-Life Diaphragm W69698 is the replacement diaphragm for the G3 cleaner. The Diaphragm opens and closes causing the G3 cleaner to hop up and down on the bottom of the pool. In the event that the cleaner isn't hopping up and down, check the diaphragm for debris or potential wear holes.

Zodiac In-Line Leaf Catcher Canister | W26705

Zodiac Leaf Catcher has a greater capacity for leaves and debris than the average pump basket

Zodiac Baracuda Foot Pad | W70327

Zodiac Baracuda G3 Cassette Chamber w/ Compression Ring | W70345

Zodiac MX6 Advanced Suction Automatic Pool Cleaner | MX6

The new MX6 is an highly efficient pool cleaning robot that features best-in-class vacuum power and programmed navigation for a comprehensively clean pool without the hassle. MX6 boasts an innovative low-flow design so it consumes less energy than any cleaner in its class, making it the ideal cleaner for pools with 2-speed or variable-speed pumps.

Zodiac Baracuda MX8 Cleaner Bearing (Wheel & Engine) | R0527000

The wheel and engine bearing is a replacement part for the Baracuda MX8 pool cleaner. There are 10 bearings total inside the MX8; this bearing helps spin certain pieces in the pool cleaner, allowing it to maneuver around the swimming pool.

Zodiac Flow Regulator Valve | FRV100

Zodiac Ranger Aboveground Suction Pool Cleaner, 32' Feed Hose, AG Disc | W01698

Baracuda Ranger Above Ground Automatic Pool Cleaner Features and Benefits Affordable and dependable automatic pool cleaner for above-ground pools Removes dirt, twigs, and other debris with no extra plumbing Installs in minutes The extra large wheel deflector helps prevent the cleaner from getting caught on steps, stairs, or in corners Flowkeeper valve and Insta-Skim Compact self-adjusting flow control valves automatically regulate water flow 1-year limited warranty covers manufacturing defects and wear and tear on cleaner and hoses

Zodiac Baracuda G3 Bumper Fin | W69526

Zodiac Hose Kit, Aqua, Long Life 1 M | W83140