PoolsideTech Pool & Spa Parts
Browse 7 PoolsideTech products available at BidBuild Marketplace. Check each item's MFG # to match your existing equipment, and contact our team if you need help finding the right part.
Poolside Tech Controller The Attendant w/ 2 Relays | ATT-2
Poolside Tech High Voltage Relay Kit, 2/Pack | ATT-HVR2P
Included in this kit is a pack of two standard 25 amp high voltage relays, compatible with The Attendant automation system (sold separately), allowing for expansion on larger system installations for The Attendant. To ensure device compatibility, it is best to leverage these relays for The Attendant. By default, the base model of The Attendant ships with two high voltage relays pre-mounted and connected to ports RELAY1 and RELAY2. Depending on your model, you may have up to 8 installed. Additional relays can be installed at any time based upon the needs of your equipment pad.
Poolside Tech The Attendant Temperature Sensor Kit | ATT-TSK
The Poolside Tech Temperature Sensor Kit is a recommended accessory designed to work with The Attendant pool automation system (sold separately). The Temperature Sensor Kit includes two temperature sensors & two clamps, good for PVC plumping up to 2” in diameter. The standard use of the temperature sensors are for water & ambient sensing. Temperature sensors are also appropriate for solar heating installations. With Temperature Sensors installed, The Attendant will accurately measure the water, ambient (air) & solar temperature and record those values to the Poolside Attendant app. The Water Temperature Sensor is used to measure the current temperature of a body of water which is important for features such as smart temperature controls & energy savings, as well as our Ready By Time Feature. The Ambient (Air) Temperature Sensor is used to measure the precise temperature on the pool pad. This is also key for the Freeze Protection of your system so that you are not reliant on internet weather readings & forecasts.
Poolside Tech Legacy Automation Conversion Kit | ATT-LACK
The Poolside Tech Legacy Automation Conversion Kit (ATT-LACK) is essential when installing The Attendant (sold separately) as part of a retrofit or technology upgrade where another automation system is being replaced. Our kit consists of 8, 15-foot high-voltage relay cables which connect from the already-in-place electrical on the old automation system to The Attendant. This helps to simplify and expedite the installation of The Attendant, and saves time and money by not having to remove the old panel, nor rewiring each relay connection. In this scenario where the conversion kit is leveraged, the legacy automation system now simply becomes the load center, allowing The Attendant to take over all functionality.
BackorderPoolside Tech Attendant Mini | ATT-MINI
BackorderPoolside Tech Controller The Attendant w/ 8 Relays | ATT-8
Poolside Tech Chemistry Probe Kit | ATT-CPK
The Poolside Tech Chemistry Probe Kit is a recommended accessory, compatible with the Attendant + Chemistry pool automation system (sold separately). The Chemistry Probe kit ensures the accurate readings of pH balance and sanitizer levels, and when combined with The Attendant’s Chemistry Module (ATT-CHEM), helps in keeping your pool pristine all season long! This kit consists of a pH probe, ORP probe, and one set of Calibration Fluids. Streamline the installation and management of your pool chemistry with the assurance of compatibility to The Attendant and the backing of support for its components. Our probes have gone through a rigorous NSF 50 testing process to ensure consistent, reliable measurements of your pool's water quality. Every probe we ship goes through a series of quality assurance checks at the Poolside tech facilities to ensure a customer's peace of mind.